This years last halloween projects are finaly ready.

Hey guys! This is my printed chess set .. it includes a drawer for the pieces, magnets in the board, and magnets in the base of each piece. My plan was to sell them in an Etsy store, I left a slot open on the side so I could print custom signs for each one along with a unit number making each chess set a 1/1 original collectable.

Hey guys! first creations post ... this is my 94 Ford 3D printed replica of my own truck I used some flexible measuring tape and drew up some basic drawings of the general shape of the truck, then combined with my blueprint system I replicated the geometry in Blender to then be printed on my Prusa Mini! I also took the time to superglue some tiny bearings I had lying around to the wheel wells so the shaft of the wheels would spin freely.

Hey guys, one of the biggest stress tests of the MMU2S by far .. a WW2 airborne inspired grenade. Took at least 24 hours to print the bottom half + a few failures and some experimenting with bendable 3D prints for the clip itself.

Hey guys! had another idea here .. I call them gauge blocks. I worked as a CNC machinist and used a HAAS ST30Y Lathe .. sometimes we would get customer orders with very high quantities and we didn't really have any tools around the shop to ensure tolerance of parts mounted in the jaws of the lathe, such as the cylinders in these screenshots.. I made my own set of different length gauge blocks and used the prints daily to achieve better tolerance and efficiency.