Hey everyone! We got a live zoom call today at 3:00 PM PST. Lets talk about 3D Printing, selling, modeling issues, etc!

Im soo happy how i achieved this quality i with my kobra 2 neo 😁 Show me yours resaults 🤟

Welcome to the 3D Printing Community! You have now entered the part of the internet designed to help you learn CAD, improve your prints, and get feedback from other members! Here's EXACTLY what to do first: Step 1: Introduce yourself HERE in the Introductions TAB What printer/printers do you have? What is it that you need the most help with? Just for fun.. Show us a picture of your workspace or setup! --------- Best practices in this community: - Be nice, ask questions, share your prints and results. - Hit "Like" 👍 on helpful and informative posts - When you write your posts break up your paragraphs into single sentences to help make it easier for readers just like how I am doing it now. - Make sure to have a proper profile picture of you - If you ever get stuck or need help, you can always ask in the group. Group Rules: 1. No selling or spamming 2. No self promotion 3. No rude or snarky comments 4. Be mindful of others!

I was not able to attend the zoom call today. Where is it available to watch?

Ok everyone I could use a little help. I’m needing to print multiple of these. When I print one at a time, they end up being great. When I load 5 or 6 on the tray, the issues happen. Everything goes great until about the last 10% or so of the print and then whole thing pops off like there was never any adhesive on the bottom. I’m using bambu’s glue so I know that shouldn’t be the problem. I’d like to get to the point where I can load the whole tray up and print like 10 plus at a time but not until I get this figured out. Also, I know I could print them on the face (flat surface) but when I do, it changes the texture and look that I’m going for. Printing with Bambu PLA-CF